A clear water-based penetrating sealer soaks into the concrete pores and bonds within the surface — invisible once applied, providing strong protection without changing the look. A decorative tinted oil-based sealer sits on top of the concrete, enhances or refreshes the colour, and creates a richer satin or wet-look finish. Penetrating sealers start from $10/m². Decorative oil-based sealers start from $20/m².

For standard concrete driveways, paths, and functional surfaces where you want protection without changing appearance — choose the clear water-based penetrating sealer. For exposed aggregate, stencilled concrete, decorative surfaces, or faded concrete that needs a colour refresh — choose the tinted oil-based sealer. We'll recommend the best fit during your free quote.

Penetrating sealers typically last 3–5 years before needing reapplication. Decorative oil-based sealers usually last 2–4 years depending on traffic and sun exposure. Properties with heavy use, full-day sun, or vehicle traffic may need resealing earlier; shaded or low-use areas can stretch longer.

No. Once sealed, concrete typically stays protected for several years. You'll only need to reseal when the protection begins to wear off — we can advise on timing during your maintenance schedule. Between sealing applications, regular gentle cleaning is enough to maintain the surface.

You can, but achieving an even, professional finish is harder than it looks. DIY sealing often results in streaking, runs, missed sections, premature wear, or uneven coverage that's visible in sunlight. Professional application uses commercial-grade sealers, correct surface prep, and proper technique to deliver long-lasting protection.

Concrete must be fully dry before sealing — typically 24–48 hours after cleaning in Queensland conditions. Shaded areas can take longer to dry. We always confirm the surface is fully cured and dry before applying any sealer to ensure proper adhesion and avoid trapping moisture inside the slab.

The clear water-based penetrating sealer leaves the concrete looking unchanged — invisible once applied. The decorative oil-based sealer changes the appearance significantly: enhanced colour, richer depth, and a satin or wet-look finish. We'll show you product samples and discuss the look you want before applying anything.

Foot traffic is usually safe 4–6 hours after application. Vehicle traffic is typically safe after 24 hours. Full cure (when the seal reaches maximum durability) takes 5–7 days. We provide specific curing guidance based on the product applied and current weather conditions.

Most residential driveway sealing jobs are completed in 1 day, with the second coat applied later that day or the next morning. Larger areas or jobs requiring multiple coats may take longer. The cleaning step (if combined) is usually done the day before so the surface can dry fully.

Concrete sealing is priced per square metre — from $10/m² for water-based penetrating sealer, from $20/m² for decorative oil-based sealer. A minimum call-out applies for small areas. Final pricing is confirmed during a free quote.

Yes. All concrete sealing work is backed by our 30-day workmanship guarantee. Sealer products themselves carry the manufacturer's warranty, which we'll provide details for at the time of service.